SFP 1-20/120AC

https://www.phoenixcontact.com/us/products/2856702 EMC filter surge protection device - SFP 1-20/120AC - 2856702 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Device protection, according to type 3/class III, with network interference suppression filter to prevent highfrequency interference voltages, for 1-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE), with remote indication contact. Product Description Device protection with interference filter Product Features ■ ■ ■ ■ ■ Can be installed in industrial environments Thermal monitoring of the protective circuit Combined protective circuit for absorbing transient surge voltages and high-frequency interference voltages Disconnection status signaled via floating remote indication contact Integrated power display switches off automatically when there is a malfunction due to overload. Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 615.2 g Custom tariff number 85363010 Country of origin Germany Technical data Dimensions Height 93 mm Width 112 mm Depth 79 mm Ambient conditions Degree of protection IP20 Ambient temperature (operation) -25 °C ... 70 °C Ambient temperature (storage/transport) -25 °C ... 70 °C 03/14/2016   Page 1 / 6 https://www.phoenixcontact.com/us/products/2856702 EMC filter surge protection device - SFP 1-20/120AC - 2856702 Technical data Ambient conditions Permissible humidity (operation) 5 % ... 95 % General Standards/specifications IEC 61643-11 2011 EN 61643-11 2012 IEC test classification III T3 EN type T3 Number of ports Two SPD design Voltage-limiting type Mode of protection L-N L-PE N-PE Mounting type DIN rail: 35 mm Color black silver Housing material Aluminum Degree of pollution 2 Flammability rating according to UL 94 V-0 Type Rail-mountable module, one-piece Number of positions 2 Surge protection fault message Optical, remote indicator contact For country-specific use in USA, CN, BR Protective circuit Nominal voltage UN 120 V AC (TN) 120 V AC (TT - only in use with RCD) 120 V AC (IT - only in use with RCD) Nominal frequency fN 50 Hz (60 Hz) Maximum continuous voltage UC 150 V AC Nominal current IN 20 A (40°C) Rated load current IL 20 A (40°C) Residual current IPE ≤ 0.6 mA Nominal discharge current In (8/20) µs 3 kA Standby power consumption PC ≤ 7.5 VA (at UREF) ≤ 10 VA (at UC) Reference test voltage UREF 132 V AC Combination wave UOC 6 kV (3 kA) 03/14/2016   Page 2 / 6 https://www.phoenixcontact.com/us/products/2856702 EMC filter surge protection device - SFP 1-20/120AC - 2856702 Technical data Protective circuit Voltage protection level Up ≤ 0.5 kV TOV behavior at UT (L-N) 175 V AC (5 s / withstand mode) 240 V AC (5 s / safe failure mode) 208 V AC (120 min / safe failure mode) TOV behavior at UT (L-PE) 208 V AC (5 s / withstand mode) 175 V AC (120 min / withstand mode) 1332 V AC (200 ms / safe failure mode) TOV behavior at UT (N-PE) 1200 V AC (200 ms / safe failure mode) Response time tA ≤ 25 ns Capacity (L-N) 1 µF ±10 % 10 nF ±10 % (X2-275 V) Capacity (L-PE) 2.2 nF ±20 % (Y2-250 V) Capacity (L-PEN) 2.2 nF ±20 % (Y2-250 V) Max. required back-up fuse 20 A (MCB B/general purpose) 16 A (IT - MCB B/general purpose) Input attenuation aE, sym. 20 dB (≥ 100 kHz / 50 Ω) Input attenuation aE, asym. 30 dB (≥ 1 MHz / 50 Ω) Short-circuit current rating ISCCR 5 kA AC (TN/TT) 1 kA AC (IT) Indicator/remote signaling Connection name Remote fault indicator contact Switching function PDT contact Operating voltage 12 V AC ... 250 V AC 250 V DC (250 mA DC) Operating current 100 mA AC ... 1 A 1 A (48 V DC) Connection method Pluggable screw connection Screw thread M2 Tightening torque 0.25 Nm Stripping length 7 mm Conductor cross section AWG 26 ... 16 Connection data Connection method Screw terminal blocks Conductor cross section AWG 14 ... 10 Screw thread M3 Tightening torque 0.5 Nm ... 0.6 Nm 03/14/2016   Page 3 / 6 https://www.phoenixcontact.com/us/products/2856702 EMC filter surge protection device - SFP 1-20/120AC - 2856702 Technical data Connection data 4.5 lbf-in. ... 5.5 lbf-in. Stripping length 8 mm UL specifications SPD Type 2CA Maximum continuous operating voltage MCOV (L-N) 150 V AC Maximum continuous operating voltage MCOV (L-G) 150 V AC Maximum continuous operating voltage MCOV (N-G) 150 V AC Mode of protection L-N L-G N-G Power distribution system 1 Nominal frequency 50/60 Hz Voltage protection rating VPR (L-N) 500 V Voltage protection rating VPR (L-G) 500 V Voltage protection rating VPR (N-G) 500 V Nominal discharge current In 3 kA Short-circuit current rating (SCCR) 5 kA Protective circuit, filter Discharge resistor 820 kΩ Clamping voltage ringwave (L-N) 100 V (category A 100 kHz 6 kV/200 A) 195 V (category B 100 kHz 6 kV/500 A) Clamping voltage ringwave (L-PE) 390 V (category A 100 kHz 6 kV/200 A) 390 V (category B 100 kHz 6 kV/500 A) Classifications eCl@ss eCl@ss 4.0 27140201 eCl@ss 4.1 27130801 eCl@ss 5.0 27130801 eCl@ss 5.1 27130801 eCl@ss 6.0 27130806 eCl@ss 7.0 27130806 eCl@ss 8.0 27130806 eCl@ss 9.0 27130806 03/14/2016   Page 4 / 6 https://www.phoenixcontact.com/us/products/2856702 EMC filter surge protection device - SFP 1-20/120AC - 2856702 Classifications ETIM ETIM 2.0 EC000942 ETIM 3.0 EC000942 ETIM 4.0 EC000942 ETIM 5.0 EC000942 UNSPSC UNSPSC 6.01 30212010 UNSPSC 7.0901 39121610 UNSPSC 11 39121610 UNSPSC 12.01 39121610 UNSPSC 13.2 39121620 Approvals Approvals Approvals UL Recognized / cUL Recognized / EAC / cULus Recognized Ex Approvals Approvals submitted Approval details UL Recognized  cUL Recognized  EAC  03/14/2016   Page 5 / 6 https://www.phoenixcontact.com/us/products/2856702 EMC filter surge protection device - SFP 1-20/120AC - 2856702 Approvals cULus Recognized  Drawings Circuit diagram Diagram NO 14 COM 11 NC 12 L 100 aE 80 L IN OUT 60 dB 40 N N 20 0 10 kHz 1 kHz symmetrical asymmetrical Diagram 100 kHz 10 MHz 1 MHz Frequency Dimensional drawing I [A] 30 20 10 86,6 0 50 60 70 80 T [°C] 90 79 40 112 30 Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 03/14/2016   Page 6 / 6